HOW TO SIZE YOUR KORE GUN BELT
1. FIND YOUR PANT SIZE
On the back of the belt, use the ruler markings to find your pant size.
On the back of the belt, use the ruler markings to find your pant size.
2. ADD FOR YOUR CARRY STYLE & CUT
Add 4" for OWB carry, or 6" for IWB carry to your pant size. Cut at the appropriate mark using a sharp pair of scissors.
Add 4" for OWB carry, or 6" for IWB carry to your pant size. Cut at the appropriate mark using a sharp pair of scissors.
Example: If your pant size is 34", cut the belt at the 38" mark for OWB carry, or the 40" mark for IWB carry.
IMPORTANT: If your pant size is close to the maximum size marking, DO NOT CUT. Try the belt on first, then trim accordingly.
3. ATTACH THE BUCKLE
Loosen the 2 set screws on the back of the buckle with the included wrench. Insert the cut end of the belt completely into the buckle receptacle with teeth.
Loosen the 2 set screws on the back of the buckle with the included wrench. Insert the cut end of the belt completely into the buckle receptacle with teeth.
4. SECURE THE BUCKLE
Clamp the teeth down firmly, then gently tighten the 2 set screws on the back of the buckle until they sit flush. Use caution to ensure the set screws are not overtightened or stripped.
Clamp the teeth down firmly, then gently tighten the 2 set screws on the back of the buckle until they sit flush. Use caution to ensure the set screws are not overtightened or stripped.
IMPORTANT: Do not tighten the set screws until the teeth are fully clamped down.
5. TRY ON & CHECK THE FIT
Feed the belt around your waist from left to right, through the buckle, and tighten until snug.
Feed the belt around your waist from left to right, through the buckle, and tighten until snug.
The tip of the belt should extend approximately 3" beyond your first belt loop.
WATCH THE SIZING VIDEO